Fence lines and boundaries, checked through the night.
People at the fence line and inside the boundary after hours. Australian-only processing available.
Vael adds AI detection and notification to the cameras your organisation already owns, across your sites. Each event is checked by AI before anyone is notified, and can be checked against your own systems by API. Configured for you by our team.
Delivered with our partner

Running on live sites including a major airport, explosives manufacturers, coal mines, waste and recycling operators, industrial estates and vehicle logistics.
Case study: lithium battery fire clean-up →Sites protected with Site Safe Security · analysed and notified by Vael
$1.3 billion plus
in assets protected across Australia






AI pre-screening before events reach your operators. Your operators and your response stay yours. Fewer false alarms reach your operators →
Your stores on one platform, on the cameras and recorders you already own. Every event checked before anyone is notified →
Illegal dumping, after-hours entry, fire and smoke, on the CCTV you already run. Illegal dumping, detected while it happens →
Perimeter, gates, fire and smoke, with events checked against your own systems. Someone at the fence. Checked before you are woken →
After-hours detection across grounds and car parks. After hours only, and no classrooms. After hours, someone is on campus →
Watch an event pass through Gateway: checked by AI, checked against your own systems, then sent to the right person with the image attached. Shown on demo data.
Our team sets up each camera for what your site actually needs: what counts as an event, where to look, when it matters and who hears about it. Everything else is ignored.
Each starts from a proven setup and is tuned to your site, then checked on your own footage before you commit.
People at the fence line and inside the boundary after hours. Australian-only processing available.
Open or closed, and whether anything is actually passing through.
Only your chosen areas and hours. Wildlife and weather are screened out to cut false alerts.
Vehicles unloading rubbish where they shouldn't, and visible smoke or flame around piles. Fire alerts add to your fire systems, never replace them.
Something else your organisation can't afford to miss? If a camera can see it, a 30-minute brief will tell you whether we can catch it reliably.
Talk to our team →AI detection and notification for organisations that run their own sites and their own systems. Built in Australia.
It starts with a free 30-minute Detection Brief. Pass criteria are agreed up front, and you see it working on your own sites before you subscribe.
Tell us what you can't afford to miss. You get one page back: what we'll catch, on which cameras, and how your team will be notified.
We set up your cameras and run the agreed detection profiles live, then give you a go or no-go against the pass criteria.
Setup changes included. New kinds of detection are quoted separately and only built when they work reliably.
Vael is an Australian company, designed and built for the conditions our customers work in: many sites, long fence lines and big distances between them.
Vael is set up to catch what happens on your site: a gate, a fence, smoke, a person in the wrong place. Our standard service does not identify individuals.
Any capability beyond that is only offered with the right legal approvals, and with clear notice at the site.
Australian-only processing is available for sites that need it, and we tell you up front which route your site uses.
Your footage stays yours. Snapshots and clips are kept for a set period, then deleted.
AI CCTV detection and notification is software that checks security camera footage for the events an organisation cares about, such as a person on site after hours, a gate left open or smoke near a stockpile, and notifies the right people with a snapshot and clip. Vael runs it on the cameras you already own.
In most cases, yes. Vael works with most IP cameras and recorders, so nothing is ripped out or replaced. Your cameras, recorders and network are checked during the free Detection Brief, and our team handles the setup.
People and vehicles on site after hours, a gate left open, perimeter intrusion along fence lines and boundaries, illegal rubbish dumping, and visible smoke or flame. Each camera has a detection profile for its own areas and hours.
Yes. By API, Vael can check what a camera sees against your own systems before anyone is notified, and for monitoring stations it can pass confirmed events into the alarm platform they already run. What that looks like for you is agreed in your Detection Brief.
Back to base monitoring sends alarm signals to a staffed, graded control room that actions a response plan. Vael is a detection and notification layer on your cameras: it screens events and tells your people, and can escalate to your security provider. Many sites use both together.
Everyone on the site's notify list, with a snapshot and clip attached so they can see what happened before deciding what to do. Alerts can also escalate to your security provider. Response decisions stay with you or your security provider. Notifications are subject to system availability.
Our standard service does not identify individuals. It is set up around events on your site, such as a gate, a fence, smoke or a person in the wrong place. Any capability beyond that is only offered with the right legal approvals, and with clear notice at the site.
Thirty minutes, no charge, no obligation. You leave with a one-page plan for your sites, whether or not you go ahead.